Mac OS 9
Finishing Pane (Mac OS 9)
The following settings are available on the Finishing pane. For details on settings items, refer to the printer
driver help.
Setting Item Description
A Media Source
Y ou can choose the media source.
Options displayed in the list vary depending on the selection in C Media
T ype in the Main Pane (Mac OS 9) . (→P .584)
B Roll Paper W idth Displays the paper width of the roll loaded in the printer . Unknown is
displayed if the printer cannot detect the roll paper width.
C W atermark
Activating this option makes two settings available, D W atermarks and
E Edit W atermark .
Printing With W atermarks (→P .482)
D W atermarks Lists the provided watermarks. Choose the watermark to print.
E Edit W atermark Click to display the Edit W atermark dialog box for creating your own,
original watermark.
F Print Centered Choose this option to print the document images in the center of the
paper .
Printing Originals Centered on Rolls (→P .441)
Printing Originals Centered on Sheets (→P .442)
G Rotate 180 degrees
Activate this setting to rotate the document image by 180 degrees before
printing.
H No Spaces at T op or Bottom Activate this setting to print the next image skipping blank areas above
and below printable data in documents, which enables you to conserve
the paper .
Conserving Roll Paper by Printing Originals Without T op and Bottom
Margins (→P .459)
I Rotate Page 90 degrees Activate this setting to rotate the document image by 90 degrees before
printing.
Conserving Roll Paper by Rotating Originals 90 Degrees (→P .458)
588 Software
To Next Page
Loading...
Need help?
General