Ink T anks
When to Replace Ink T anks
Replace or prepare to replace Ink T ank in the following situations.
If a message for checking the ink is shown on the Display Screen
When there is little ink left, the Message lamp is lit and Ink Level: Check is shown on the Display Screen .
Y ou can continue to print, but prepare to replace the Ink T ank . ( → P .686)
If a message for ink replacement is shown on the Display Screen
When the Ink T ank becomes empty , the Message lamp ashes, a message regarding Ink T ank replacement
is shown on the Display Screen . Y ou can continue to print, but replace the Ink T ank .
When ink runs out, the Message lamp ashes, a message regarding Ink T ank replacement is shown on the
Display Screen , and printing is disabled. Replace the Ink T ank at this point.
Before print jobs and maintenance that consume a lot of ink
If little ink is left, there may not be enough for large-format printing, head cleaning, and maintenance, which
require a lot of ink. In this case, replace or prepare to replace the Ink T ank before maintenance.
Maintenance 687
To Next Page
Loading...
Need help?
General