To Next Page

To Previous Page

Network Setting

Conguring the IP Address on the Printer

Y ou must congure the printer ’ s IP address before using the printer on a TCP/IP network.

The printer ’ s IP address is congured automatically when you install the printer driver following the instructions

in the Quick Start Guide .

Follow the steps below to congure the IP address by using imagePROGRAF Device Setup Utility , the

printer Control Panel , or ARP or PING commands, if the IP address is changed, or if you change the printer

connection mode to a network connection. For details on conguring the IP address, refer to the following

topics.

• Conguring the IP Address Using imagePROGRAF Device Setup Utility (Windows) (→P .533)

• Conguring the IP Address Using the Printer Control Panel (→P .615)

• Conguring the IP Address Using ARP and PING Commands (→P .616)

Note

• W e recommend conguring the printer ’ s IP address even if you will use the printer in other network

except for TCP/IP . Conguring the printer ’ s IP address enables you to use RemoteUI to congure the

network settings and manage the printer with a web browser .

For details on RemoteUI , see “Using RemoteUI”. (→P .619)

Network Setting 61 1

Canon 2162B002 User Manual

Other manuals for Canon 2162B002