To Next Page

To Previous Page

Network Setting

Conguring the IP Address Using the Printer Control

Panel

This topic describes how to congure the printer ’ s IP address on the Control Panel .

1. Press the Menu button to display MAIN MENU .

2. Press ▲ or ▼ to select Interface Setup , and then press the ► button.

3. Press ▲ or ▼ to select TCP/IP , and then press the ► button.

4. Press ▲ or ▼ to select IP Setting , and then press the ► button.

5. Press ▲ or ▼ to select IP Address , and then press the ► button.

6. Press ◄ or ► to move to another digit for numerical input.

7. Press ▲ or ▼ to select the number , and then press the OK button.

Note

• Hold down ▲ or ▼ to increase or decrease the value continuously .

8. Repeat steps 6-7 to enter the IP address assigned to the printer .

9. Press the Online button to bring the printer online.

If any of the settings are changed, a message for conrmation is displayed. In this case, press

the OK button.

Note

• If an error message is displayed, check the settings and correct any invalid values.

• T o cancel the setup process, hold down the Stop button for a second or more.

Important

• Be sure to complete step 6. This will activate the values you have entered.

• Y ou can also specify the subnet mask and default gateway on the Control Panel .

Network Setting 615

Canon 2162B002 User Manual

Other manuals for Canon 2162B002