Handling sheets for paper feed slots
Removing the Sheet
1. Press the Load/Eject button.
Note
• Paper cannot be ejected by using the Load/Eject button when print jobs are in progress or during
the ink drying period. Before ejecting paper , press the Stop button to cancel printing, print job
processing, or ink drying.
2. Press the OK button to eject the paper .
The paper is ejected from the front of the printer .
3. Open the T op Cover , lift the Release Lever , and remove the paper .
4. Lower the Release Lever and close the T op Cover .
214 Handling Paper
To Next Page
Loading...
Need help?
General