Network Setting
Using RemoteUI
Enter the printer ’ s IP address in a web browser to display the RemoteUI page. After you log on to RemoteUI
from the page, you can check and change the status of the printer and print jobs, and congure network
settings.
For details on conguring printer settings for networks, refer to the following topics.
• Conguring the Printer ’ s TCP/IP Network Settings (→P .613)
• Conguring the Printer ’ s AppleT alk Network Settings (→P .634)
• Conguring the Printer ’ s NetW are Network Settings (→P .621)
• Specifying Printer-Related Information (→P .618)
Note
• RemoteUI also of fers many other features. Y ou can display the ink levels, check error messages and
other status information, and cancel print jobs.
• By factory default, the English screen is displayed. Y ou can change the display language after logging
on in Administrator Mode by choosing the desired language in the Language list.
Important
• Use Netscape Navigator/Communicator 6.0 or later , Internet Explorer 5.01 or later , or Firefox 1.5 or later
as a web browser . In Mac OS X, you can also use Safari 1.32 or later or Safari 2.03 or later .
• Access is not possible via a proxy server . In environments where a proxy server is used, add the
printer ’ s IP address to Exceptions (addresses accessed without a proxy server) in the web browser
proxy server settings. (Settings may vary depending on the network environment.)
• Enable JavaScript and cookies in the web browser .
• If you access RemoteUI with the printer name instead of its IP address, make sure the DNS settings are
correctly congured.
Network Setting 619
To Next Page
Loading...
Need help?
General