Messages regarding paper
Papr Size Mismatch
Cause Corrective Action
Adjust the paper size setting in the printer driver to
match the size loaded in the printer as follows.
1. Hold down the Stop button for a second or more
to cancel printing.
2. Change the paper size setting in the printer driver
to the size loaded in the printer and try printing
again.
Replace the loaded paper with paper of a size that
matches the size setting in the printer driver as
follows.
1. Hold down the Stop button for a second or more
to cancel printing.
2. Replace the loaded paper to match the paper size
setting in the printer driver and try printing again.
The paper size as specied on the printer does not
match the size specied in the printer driver .
Press the Online button to resume printing.
However , this may cause a paper jam or printing
problem.
This paper cannot be used.
Check supported paper sizes.
Cause Corrective Action
The loaded paper is too large for the printer . Load paper of the correct size.
( → P .173)
The loaded paper is too small for the printer . Load paper of the correct size.
( → P .173)
Paper has been loaded that is too small to print
the test pattern for printhead adjustment or nozzle
checking.
Load unused paper A4/Letter-sized or larger . More
than one sheet may be required depending on the
adjustment.
Error Message 763
To Next Page
Loading...
Need help?
General