Handling sheets for paper feed slots
Loading the Sheet in the Printer
Note
• For details on supported types and sizes of the paper , see Paper Sizes (→P .173) or the Paper
Reference Guide . ( → P .167)
• Loading a sheet while a roll remains loaded may cause paper jams. W e recommend removing the
roll if you will load a sheet. ( → P .184)
T o prevent the roll from unwinding if you leave it loaded, wrap a sheet of paper around the roll and
tape it to fasten it.
• If the Platen is dirty , clean inside the T op Cover . ( → P .714)
• After pressing the Load/Eject button, you can refer to instructions on the Display Screen as you load
the paper .
1. If you send a print job from a computer beforehand, the type and size of paper are shown on the
Display Screen . Lift the Release Lever and open the T op Cover .
210 Handling Paper
To Next Page
Loading...
Need help?
General