Handling rolls
Specifying the Ink Drying T ime for Rolls
When you are using paper that takes longer for ink to adhere, if the Cutter touches printed surfaces that are still
wet, it may damage the paper or cause rough cut edges. Also, ink may be transferred onto the paper surface during
ejection, soiling it. Y ou can prevent problems by adjusting the drying time after printing before the paper is cut.
W indows
1. Display the printer driver dialog box.
( → P .392)
2. Select the Main sheet and click C Advanced Settings in A Media T ype .
3. In the Paper Detailed Settings dialog box displayed next, select the desired settings values in
C Between Pages and D Between Scans in B Drying T ime , and then click OK .
( → P .398)
130 Handling Paper
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General