Other useful settings
Printing in Ideal Colors for Light in the V iewing
Environment
Y ou can print in the colors that look best when viewed under the light where the printed image will be displayed.
There are two ways to adjust the color tone for the ambient light, as follows.
By selecting color tones on Charts before printing
On the printed Chart , note the number of the set of colors with the desired color tone and enter this number in
the printer driver before printing.
Important
• This function requires that the Light Source Check T ool be installed.
• Y ou can install the Light Source Check T ool from the User Software CD-ROM .
• This function is only supported in Windows and Mac OS X 10.4 or later .
• The colors in this function may dif fer slightly depending on the system software used (Windows 32/64
bit or Macintosh).
For instructions on selecting color tones on Charts before printing, refer to the following topic:
• Selecting Color T ones on Charts Before Printing (Windows) (→P .368)
• Selecting Color T ones on Charts Before Printing (Mac OS X) (→P .596)
Printing in Colors Matching the Measured Ambient Light
Measure the light level in the viewing environment and enter the results in the printer driver before printing.
Important
• This function requires the i1 spectrophotometer . The Light Source Measure T ool must also be installed.
• Y ou can install the Light Source Measure T ool from the User Software CD-ROM .
• For a list of supported i1 devices, refer to the manual provided with the Light Source Measure T ool .
• This function is only supported in Windows and Mac OS X 10.4 or later .
• The colors in this function may dif fer slightly depending on the system software used (Windows 32/64
bit or Macintosh).
For instructions on measuring light levels before printing, refer to the following topic:
• Printing in Colors Matching the Measured Ambient Light (Windows) (→P .372)
• Printing in Colors Matching the Measured Ambient Light (Mac OS X) (→P .603)
Enhanced Printing Options 367
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General