Messages regarding paper
Cannot feed paper .
Cause Corrective Action
The sheet cannot be fed correctly . Reload the sheet straight, in the correct position.
( → P .148)
Cannot cut paper .
Cause Corrective Action
There are sheets left on the Ejection Guide .
1. Remove the paper .
2. If Not nished printing. Finish printing
remaining jobs? is shown on the Display Screen ,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
There is a foreign object by the Output T ray ,
obstructing the Cutter Unit .
1. Remove the foreign object.
2. If Not nished printing. Finish printing
remaining jobs? is shown on the Display Screen ,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
Y ou are not using the printer under the recommended
environmental conditions for the paper .
Use the printer only where the recommended
environmental conditions for the paper are met.
Note that various environmental conditions are
recommended for various types of paper . For details
on the recommended environmental conditions for
paper , see the Paper Reference Guide .
( → P .104)
Y ou are using paper that is not compatible with
automatic cutting.
Specify Manual as the cutting method and cut the
roll manually .
( → P .132)
For information about paper that is compatible with
automatic cutting, see the Paper Reference Guide .
( → P .104)
The Cutter Unit stops in the middle of cutting. Move the Cutter Unit to the left and remove the
paper . If the paper cannot be cut using the Cutter
Unit , specify Manual as the roll cutting method and
cut the roll manually .
( → P .123)
( → P .132)
In other cases, the Cutter Unit may be damaged. Contact your Canon dealer for assistance.
692 Error Message
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General