Canon imagePROGRAF iPF6000S User Manual

Messages regarding paper
Roll printing is selected.
Cause Corrective Action
Load a roll and try printing again.Y ou have attempted to print a test print sheet or
other printer status information on a roll, but no roll
is loaded.
T o print on a sheet instead, hold the Stop button for
more than a second to cancel printing, load a sheet,
and then print.
( → P .93)
Roll printing is selected, but sheets are loaded.
Cause Corrective Action
Press the Load/Eject button and remove the sheet.
( → P .154)
Load a roll and try printing again.
( → P .1 18)
A print job for rolls was received when a sheet is
loaded.
Hold down the Stop button for a second or more to
cancel printing.
The roll is empty .
Cause Corrective Action
The roll is empty . Follow these steps to replace the used roll with a new
roll of the same type and size.
1. Remove the roll.
( → P .120)
( → P .121)
( → P .122)
2. Load the new roll.
( → P .1 15)
( → P .1 17)
( → P .1 18)
3. If no barcode was printed on the roll, specify the
type of paper .
( → P .1 13)
4. If no barcode was printed on the roll, specify the
paper length.
( → P .1 14)
5. If Not nished printing. Finish printing
remaining jobs? is shown on the Display Screen ,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
688 Error Message
Downloaded from ManualsPrinter.com Manuals

Canon imagePROGRAF iPF6000S Specifications

General

Brand	Canon
Model	imagePROGRAF iPF6000S
Category	Printer
Language	English