Responding to Messages
Error Messages
Error messages
Check the message and take the appropriate action.
• Borderless printng not possible. (→P .693)
• Calibration There is a problem with the multi-sensor . (→P .704)
• Cannot adjust band. (→P .696)
• Cannot adjust printhead. (→P .697)
• Cannot calibrate. (→P .697)
• Cannot cut paper . (→P .692)
• Cannot detect papr (→P .691)
• Cannot feed paper . (→P .692)
• Cannot print as specied. (→P .696)
• End of paper feed. (→P .693)
• ERROR Exxx-xxxx (x represents a letter or number) (→P .703)
• File read error . (→P .701)
• GARO Wxxxx (x represents a number) (→P .703)
• Hard disk error . (→P .701)
• Hardware error . xxxxxxxx-xxxx (x represents a letter or number) (→P .703)
• Ink insufcient. (→P .694)
• Ink Level: Check (→P .695)
• Ink tank error . (→P .695)
• No ink left. (→P .694)
• Insufcient paper for job (→P .687)
• Mail box full. Delete unwanted data (→P .702)
• Mail box full. Cannot save. (→P .702)
• Mail box full. (→P .701)
• Mail box full. Now printing without saving data. (→P .701)
• Mail box nearly full. (→P .701)
• Maintenance cartridge full. (→P .700)
• Maintenance cartridge problem. (→P .700)
• Manual printing is selected, but a roll is loaded. (→P .689)
• Multi-sensor error (→P .704)
• No ink tank loaded. (→P .695)
• No Maintenance Cartridge capacity . (→P .700)
• No maintenance cartridge. (→P .700)
• No Roll Feed Unit. (→P .689)
• Paper jam. (→P .690)
• Paper loaded askew . (→P .691)
• Paper Mismatch (→P .685)
• Paper size not detected. (→P .686)
• Papr T ype Mismatch (→P .685)
• Parts replacement time has passed. (→P .704)
• PHeads: wrong pos. (→P .699)
• Prepare for maint cart replacement. (→P .700)
• Prepare for parts replacement. (→P .703)
• Problem with Printhead x (x is L, R, or LR) (→P .699)
• Roll feed unit err (→P .689)
Error Message 683
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General