102
Adjusting Image Quality (Image Adjustment)
Adjusting to the
Ambient Light
(Ambient Light)
> [Image adjustment] > [Advanced
adjustment] >
[Ambient light]
You can correct and more effectively
project an image according to the
ambient light on the screen.
The [Ambient light] setting is
available in Photo/sRGB image
mode (P97).
Examples of Ambient Light Level
Settings
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Off] is the factory default.
HDMI Component LAN
Digital PC Analog PC USB
Off Projects an image with no
correction.
Adjust You can specify the type and
level (brightness) of the ambient
light.
Type Tungsten
Select this if the ambient
light source is a light bulb
or bulb color fluorescent.
Fluorescent
Select this if the ambient
light source is a day white
fluorescent.
Level L Select this if the ambient
light is normal.
H Select this if the ambient
light is high (bright).
Level Example Location
L Projection room, sports bar, etc.
H Conference room, lecture room
To Next Page
Loading...
Need help?
General
