Canon WUX450 User Manual

91
Setting Display Status (Input Settings)
Operation Setting Functions from Menus
Adjusting the Input
Signal
(Horizontal pixels)
> [Input settings] > [Input signal
settings] >
[Horizontal pixels]
You can adjust the number of the
pixels in the horizontal direction if
the length of the screen is too long
or too short in the horizontal
direction.
Use the [ ] / [ ] buttons to select a
value.
When you have completed the
adjustment, press the OK button to
accept your setting and then press the
MENU button or EXIT button.
• Perform this adjustment if the Auto PC
function (P57) cannot adjust the projected
image correctly.
Adjusting the Input
Signal
(Vertical pixels)
> [Input settings] > [Input signal
settings] >
[Vertical pixels]
You can adjust the number of the
pixels in the vertical direction if the
screen is too long or too short in the
vertical direction.
Use the [ ] / [ ] buttons to select a
value.
When you have completed the
adjustment, press the OK button to
accept your setting and then press the
MENU button or EXIT button.
• Perform this adjustment if the Auto PC
function (P57) cannot adjust the projected
image correctly.
HDMI Component LAN
Digital PC Analog PC USB
Screen
HDMI Component LAN
Digital PC Analog PC USB
Screen

Canon WUX450 Specifications

General

Brand	Canon
Model	WUX450
Category	Projector
Language	English