53
Operation Projecting an Image
Step 2 Select an Input Signal
Select the input signal in the [Input] menu when you want to project a digital PC or
AV equipment signal, or to switch between inputs when multiple computers or
multiple sets of AV equipment are connected.
Skip this step if you have not changed the input signal since the last projection.
Types of Input Signals
The table below shows the relationship among input signals supported by the
projector, input terminals and connection cables.
Input signal Input terminal Types of connection cables
HDMI
HDMI cable (not included)
Digital PC
DVI cable (not included)
Analog
PC-1
VGA-DVI cable (not included)
Analog
PC-2
Computer cable (supplied)
BNC cable (not included)
Component
Component cable (not included)
LAN
LAN cable (shielded twisted pair) (not included)
USB Connect a USB flash drive. (P79)
/COMPONENT
/COMPONENT
Mini D-sub 15-pin - BNC
terminal converter cable
(not included)
BNC cable
(not included)
/COMPONENT
D terminal plug - RCA plug
component conversion cable
(not included)
RCA plug - RCA plug
component cable (not included)
LAN
USB
To Next Page
Loading...
Need help?
General
