73
Operation Projecting an Image
Step 7 Set Power-Saving Settings
Press the ECO button on the remote control to complete power-saving settings.
The following three settings are available.
•Lamp Settings
For changing lamp and fan power consumption in the current image mode.
• Auto Power-Off
A function for automatically turning the power off after a certain period if the
projector is not used and there is no input signal.
• Network Standby Settings
Specify whether network functions should be active in standby mode.
1 Press the ECO button to display the window shown below.
2 Press the [ ] / [ ] buttons to select a menu.
Complete the setting for the selected function. For details, refer to the page
describing each function.
• Lamp Settings (P107)
• Auto Power-Off (P110)
• Network Standby Settings (P172)
Remote control
To Next Page
Loading...
Need help?
General
