Canon WUX450 User Manual

89
Setting Display Status (Input Settings)
Operation Setting Functions from Menus
Adjusting the Input
Signal
(Total dots)
> [Input settings] > [Input signal
settings] >
[Total dots]
You can adjust the total number of
dots in the horizontal direction.
Adjust it when stripes are displayed
on the screen.
Use the [ ] / [ ] buttons to select a
value.
When you have completed the
adjustment, press the OK button to
accept your setting and then press the
MENU button or EXIT button.
• Perform this adjustment if the Auto PC
function (P57) cannot adjust the projected
image correctly.
Adjusting the Input
Signal
(Tracking)
> [Input settings] > [Input signal
settings] >
[Tracking]
You can fine-tune the timing for
generating an image from the image
signal.
Adjusts the tracking when the image
distorts or flickers.
Use the [ ] / [ ] buttons to select a
value.
When you have completed the
adjustment, press the OK button to
accept your setting and then press the
MENU button or EXIT button.
• Perform this adjustment if the Auto PC
function (P57) cannot adjust the projected
image correctly.
HDMI Component LAN
Digital PC Analog PC USB
HDMI Component LAN
Digital PC Analog PC USB

Canon WUX450 Specifications

General

Brand	Canon
Model	WUX450
Category	Projector
Language	English