265
Using Layout Functions
Networked Multi-Projection Functions in All Modes
■ Projecting from Multiple Projectors (Multi-Projection)
In Meeting and Classroom Modes, separate images from multiple projectors can be
projected together. This is called “multi-projection.” On the layout window for
Meeting or Classroom Modes, you can set up the projection layout for each
projector used.
1 On the layout window for Meeting or Classroom Modes, specify the
projection layout for each projector.
In the layout area, drag the computer to use in projection, and then click [Start
projecting] to start projection.
2 In the pull-down list, select another projector to use.
3 Repeat steps 1 and 2 to set up the computers to use in projection from all
projectors.
To Next Page
Loading...
Need help?
General
