98
Adjusting Image Quality (Image Adjustment)
Creating/Saving a
User Profile
> [Image adjustment] > [Create
profile]
Up to 5 combinations of image
quality settings can be stored. The
stored image quality can be selected
as an image mode.
Use the [ ] / [ ] buttons and select the
save destination. (Saved memories are
indicated by checkmarks.)
When the desired save destination is
selected, press the OK button to accept
your setting and then press [Return].
• The saved settings consist of the
brightness, contrast, sharpness, gamma,
color adjustment, advanced adjustment,
and lamp mode.
• The number of displayed user memories is
5, however it is possible to save different
settings for when the connected equipment
is a computer (ANALOG PC, DIGITAL PC
or HDMI (when [HDMI In] (P115) is
[Computer]) and when AV equipment is
connected (COMPONENT, HDMI (when
[HDMI In] (P115) is [Auto])). As a result, it is
possible to save up to 10 settings.
• The image mode name which was the basis
for the settings change is also saved in the
user memory. When a user memory is
selected as the image mode, the image
mode that was the base for that user
memory is displayed in the menu as
[Baseline image mode].
HDMI Component LAN
Digital PC Analog PC USB
To Next Page
Loading...
Need help?
General
