Cisco ASR 920 series Configuration Guide Ethernet Router

PurposeCommand or Action
Binds the service instance to a bridge- domain instance
where bridge-id is the identifier for the bridge- domain
instance.
bridge-domain bridge-id
Example:
Device(config-if-srv)# bridge-domain 200
Step 6
Enables sticky behavior on the service instance.mac security sticky
Example:
Device(config-if-srv)# mac security sticky
Step 7
Enables MAC security on the service instance.mac security
Example:
Device(config-if-srv)# mac security
Step 8
Returns to user EXEC mode.end
Example:
Device(config-if-srv)# end
Step 9
Displaying the MAC Security Status of a Specific Service Instance
Perform this task to display the MAC security status of a service instance.
SUMMARY STEPS
1.
enable
2.
show ethernet service instance id id interface type number mac security
3.
end
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Device> enable
•
Enter your password if prompted.
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
106
Configuring MAC Address Limiting on Service Instances Bridge Domains and EVC Port Channels
Displaying the MAC Security Status of a Specific Service Instance

Cisco ASR 920 series Specifications

General

Brand	Cisco
Model	ASR 920 series
Category	Network Router
Language	English