Cisco ASR 920 series Configuration Guide Ethernet Router

PurposeCommand or Action
Returns to global configuration mode.exit
Example:
Device(config-if)# exit
Step 20
Enables SNMP trap generation for Ethernet CFM mep-up,
mep-down, config, loop, and cross-connect events.
snmp-server enable traps ethernet cfm cc [mep-up]
[mep-down] [config] [loop] [cross-connect]
Example:
Device(config)# snmp-server enable traps ethernet
Step 21
cfm cc mep-up mep-down config loop cross-connect
Enables SNMP trap generation for Ethernet CFM
mep-unknown, mep-missing, and service-up continuity
snmp-server enable traps ethernet cfm crosscheck
[mep-unknown | mep-missing | service-up]
Step 22
check events in relation to the cross-check operation
Example:
Device(config)# snmp-server enable traps ethernet
between statically configured MEPs and those learned
via CCMs.
cfm crosscheck mep-unknown mep-missing
service-up
Returns to privileged EXEC mode.end
Example:
Device(config)# end
Step 23
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
143
Configuring Ethernet Connectivity Fault Management in a Service Provider Network
Configuring Ethernet CFM

Cisco ASR 920 series Specifications

General

Brand	Cisco
Model	ASR 920 series
Category	Network Router
Language	English