Cisco ASR 920 series Configuration Guide Ethernet Router

PurposeCommand or Action
Enters global configuration mode.configure terminal
Example:
Device# configure terminal
Step 2
Defines a Connectivity Fault Management (CFM) domain, sets
the domain leve,l and enters Ethernet CFM configuration mode.
ethernet cfm domain domain-name level level-id
Example:
Device(config)# ethernet cfm domain cstmr1
level 3
Step 3
Defines a universally unique customer service instance (CSI)
and VLAN ID within the maintenance domain, and enters
Ethernet CFM service configuration mode.
service csi-id evc evc-name vlan vlan-id
Example:
Device(config-ecfm)# service csi2 evc evc_1
vlan 10
Step 4
Enables the transmission of continuity check messages (CCMs).continuity-check
Example:
Device(config-ecfm-srv)# continuity-check
Step 5
Enables the transmission of continuity check messages (CCMs)
at specific intervals.
continuity-check interval time
Example:
Device(config-ecfm-srv)# continuity-check
interval 1s/10s/1m/10m
Step 6
Returns to Ethernet CFM configuration mode.exit
Example:
Device(config-ecfm-srv)# exit
Step 7
Returns to global configuration mode.exit
Example:
Device(config-ecfm)# exit
Step 8
Defines an EVC and enters EVC configuration mode.
ethernet evc evc-id
Example:
Device(config)# ethernet evc 50
Step 9
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
290
Configuring Ethernet Local Management Interface at a Provider Edge
Configuring Ethernet LMI Interaction with CFM

Cisco ASR 920 series Specifications

General

Brand	Cisco
Model	ASR 920 series
Category	Network Router
Language	English