Cisco ASR 920 series Configuration Guide Ethernet Router

PurposeCommand or Action
Returns the device to global configuration mode.exit
Example:
Device(config-ecfm)# exit
Step 6
Configures the maximum amount of time that the device
waits for remote MEPs to come up before the cross-check
operation is started.
ethernet cfm mep crosscheck start-delay delay
Example:
Device(config)# ethernet cfm mep crosscheck
start-delay 60
Step 7
Returns the device to privileged EXEC mode.exit
Example:
Device(config)# exit
Step 8
Enables cross-checking between the list of configured
remote MEPs of a domain and MEPs learned through
CCMs.
ethernet cfm mep crosscheck {enable | disable} domain
domain-name {port | vlan {vlan-id | vlan-id - vlan-id | ,
vlan-id - vlan-id}}
Example:
Device# ethernet cfm mep crosscheck enable domain
cust4 vlan 100
Step 9
Configuring and Enabling the Cross-Check Function (CE-B)
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
ethernet cfm domain domain-name level level-id
4.
service short-ma-name evc evc-name vlan vlanid direction down
5.
mep mpid mpid
6.
exit
7.
ethernet cfm mep crosscheck start-delay delay
8.
exit
9.
ethernet cfm mep crosscheck {enable | disable} domain domain-name {port | vlan {vlan-id | vlan-id
- vlan-id | , vlan-id - vlan-id}}
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
269
Configuring Ethernet CFM
Configuring Ethernet CFM

Cisco ASR 920 series Specifications

General

Brand	Cisco
Model	ASR 920 series
Category	Network Router
Language	English