Cisco ASR 920 series Configuration Guide Ethernet Router

PurposeCommand or Action
Example:
Device(config-ecfm-srv)# continuity-check interval
10s
Sets the number of CCMs that should be missed before
declaring that a remote MEP is down.
continuity-check [interval time | loss-threshold threshold
| static rmep]
Example:
Device(config-ecfm-srv)# continuity-check
loss-threshold 10
Step 8
Returns the device to Ethernet CFM configuration mode.exit
Example:
Device(config-ecfm-srv)# exit
Step 9
Returns the device to global configuration mode.exit
Example:
Device(config-ecfm)# exit
Step 10
Enables CFM processing globally on the device.ethernet cfm global
Example:
Device(config)# ethernet cfm global
Step 11
Enables the CFM IEEE version of CFM.ethernet cfm ieee
Step 12
Example:
Device(config)# ethernet cfm ieee
•
This command is automatically issued when the
ethernet cfm global command is issued.
Enables caching of CFM data learned through traceroute
messages.
ethernet cfm traceroute cache
Example:
Device(config)# ethernet cfm traceroute cache
Step 13
Sets the maximum size for the CFM traceroute cache
table.
ethernet cfm traceroute cache size entries
Example:
Device(config)# ethernet cfm traceroute cache
size 200
Step 14
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
266
Configuring Ethernet CFM
Configuring Ethernet CFM

Cisco ASR 920 series Specifications

General

Brand	Cisco
Model	ASR 920 series
Category	Network Router
Language	English