Cisco ASR 920 series Configuration Guide Ethernet Router

Example: Verifying the Trunk EFP Support Configuration
The following is sample output from the show ethernet service instance command. The output displays trunk
as the service instance type and indicates that a bridge domain for VLANs in the range of 12 to 1900 (as
specified by the encapsulation parameters) has been created for service instance 4000 on a trunk port (interface).
Device# show ethernet service instance id 4000 interface port-channel 1
Service Instance ID: 4000
Service Instance Type: Trunk
Associated Interface Port-channel: 1
Associated EVC:
L2protocol drop
CE-Vlans:
Encapsulation: dot1q 12-1900 vlan protocol type 0x8100
Rewrite: ingress tag pop 1 symmetric
Interface Port-channel Dot1q Tunnel Ethertype: 0x8100
State: Up
EFP Statistics:
Pkts In Bytes In Pkts Out Bytes Out
168729725 10798985220 160246675 10255787200
EFP Microblocks:
****************
Microblock type: Bridge-domain
Bridge-domain: 12-1900
Additional References
Related Documents
Document TitleRelated Topic
Configuring Ethernet Connectivity Fault Management
in a Service Provider Network
Ethernet CFM
IEEE 802.3ah Ethernet in the First Mile
IEEE 802.3ah
Configuring ITU-T Y.1731 Fault Management
Functions
ITU-T Y.1731 fault management functions
Reliable Delivery and Filtering for Syslog
Delivering and filtering syslog messages
Cisco IOS Master Command List, All ReleasesCisco IOS commands: master list of commands with
complete command syntax, command mode,
command history, defaults, usage guidelines, and
examples
Cisco IOS Carrier Ethernet Command Reference
Cisco IOS Carrier Ethernet commands: complete
command syntax, command mode, command history,
defaults, usage guidelines, and examples
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
7
Trunk EFP Support
Example: Verifying the Trunk EFP Support Configuration

Cisco ASR 920 series Specifications

General

Brand	Cisco
Model	ASR 920 series
Category	Network Router
Language	English