Cisco ASR 920 series Configuration Guide Ethernet Router

PurposeCommand or Action
Sets a universally unique ID for a CSI within a
maintenance domain.
service csi-id evc evc-name
Example:
Device(config-ether-cfm)# service provider_1 evc
evc_100
Step 9
Statically defines a remote MEP within a
maintenance domain.
mep crosscheck mpid id evc evc-name mac
mac-address
Example:
Device(config-ether-cfm)# mep crosscheck mpid 200
evc evc_100 mac 1010.1010.1010
Step 10
Returns to global configuration mode.exit
Example:
Device(config-ether-cfm)# exit
Step 11
Defines an EVC and enters EVC configuration
mode.
ethernet evc evc-name
Example:
Device(config)# ethernet evc evc_100
Step 12
Returns to global configuration mode.exit
Example:
Device(config-evc)# exit
Step 13
Specifies an interface and enters interface
configuration mode.
interface type number
Example:
Device(config)# interface gigabitethernet0/0/1
Step 14
Disables IP processing.no ip address
Example:
Device(config-if)# no ip address
Step 15
Specifies an Ethernet service instance on an interface
and enters service instance configuration mode.
service instance id ethernet evc-id
Example:
Device(config-if)# service instance 100 ethernet
evc_100
Step 16
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
199
Configuring Ethernet Connectivity Fault Management in a Service Provider Network
Configuring Ethernet CFM

Cisco ASR 920 series Specifications

General

Brand	Cisco
Model	ASR 920 series
Category	Network Router
Language	English