Cisco ASR 920 series Configuration Guide Ethernet Router

Egress TrafficIngress Traffic
RSPAN Vlan (BD) rewrite pop1
tag symmetric
RSPAN Vlan (BD) rewrite pop1
tag symmetric
(Double traffic)-Source port
rewrite
RSPAN BD tag + source-outer-tag
+ source-inner-tag + packet
RSPAN BD tag + source-outer-tag
+ source-inner-tag + packet
no-rewrite
pop1 tag
pop2 tag
push1 tag
Configuring Local SPAN and RSPAN
Configuring Sources and Destinations for Local SPAN
To configure sources and destinations for a SPAN session:
SUMMARY STEPS
1.
configure terminal
2.
monitor session {session_number} type local
3.
source interface interface_type slot/subslot/port [, | - | rx | tx | both]
4.
destination interface interface_type slot/subslot/port [, | -]
5.
no shutdown
DETAILED STEPS
PurposeCommand or Action
Enters global configuration mode.configure terminal
Example:
Router# configure terminal
Step 1
Specifies the local SPAN session number and enters the local
monitoring configuration mode.
monitor session {session_number} type local
Example:
Router(config)# monitor session 1 type
local
Step 2
• session_number—Indicates the monitor session. The valid
range is 1 through 14.
Specifies the source interface and the traffic direction:
source interface interface_type slot/subslot/port
[, | - | rx | tx | both]
Step 3
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
389
Configuring Switched Port Analyzer
Configuring Local SPAN and RSPAN

Cisco ASR 920 series Specifications

General

Brand	Cisco
Model	ASR 920 series
Category	Network Router
Language	English