Dahua JRC-27F User Manual

User's Manual
186
◇
On the
Database Config
page, select a database, and then click
Modeling
to model all the
face images in the database.
◇
On the
Details
page, select one or more face images, and then click
Modeling
to model the
selected images.
●
Export face images.
Select one or more face images, and then click
Export
.
●
Delete face images.
Select one or more face images, and then click
Delete
.
5.9.5.4 Configuring Face Recognition
Configure alarm rules for face recognition.
5.9.5.4.1 Configuring AI by Recorder
Prerequisites
Make sure the face detection function is enabled at corresponding channel.
Procedure
Step 1 Select
Main Menu
>
AI
>
Parameters
>
Face Recognition
.
Step 2 Select the channel, enable the function, and select
AI by Recorder
in the
Type
list.
Figure 5-99 AI by recorder
Step 3 Click
Setting
next to
Schedule
to configure arming periods. The corresponding alarm
actions are linked by the alarm events triggered during armed period.
Step 4 Arm target face database.
●
General Alarm
: The alarm is triggered when the similarity of detected faces reaches
the defined value.
1. Select
General Alarm
in
AI Mode
.
2. Click
Setting
next to
Target Face Database
.

Dahua JRC-27F Specifications

General

Brand	Dahua
Model	JRC-27F
Category	Network Hardware
Language	English