Dahua JRC-27F User Manual

User's Manual
198
Table 5-29 Intrusion parameters
Parameter Description
Name Customize the rule name.
Action Set the intrusion action, including appear and crossing area.
Direction Set the direction to cross the area, including enter, exit and both.
Target Filter
Click and then select effective target. With
Human
and
Motor
Vehicle
selected by default, the system automatically identifies the
person and motor vehicle appeared within the monitoring range.
4) Click
OK
.
Step 6 Configure alarm schedule and linkage.
Figure 5-113 Schedule and alarm linkage
1) Click .
2) Click
Setting
next to
Schedule
to configure the alarm period.
The system performs linkage actions only for alarms during the arming period.
●
On the time line, drag to set the period.
●
You can also click to set the period.
3) Configure alarm linkage. For details, see Table 5-43.
4) Click
Apply
.
Step 7 Select
Enable
checkbox and then click
Apply
.
5.9.6.2.3 Abandoned Object Detection
The system generates an alarm when there is an abandoned object in the specified zone.
Step 1 Select
Main Menu
>
AI
>
Parameters
>
IVS
.

Dahua JRC-27F Specifications

General

Brand	Dahua
Model	JRC-27F
Category	Network Hardware
Language	English