Dahua JRC-27F User Manual

User's Manual
375
Figure 6-3 Manual add
Step 3 Configure parameters.
Table 6-2 Parameters of adding main device
Parameter Description
Device Name Customize the device name.
IP Address Enter the IP address of the NVR.
Port
Set the TCP port number of the server. The default value is 37777.
You can view the current TCP port number in
SETTING
>
Network
>
Port
.
Username/Password Enter the username and password of the NVR.
Step 4 Click
OK
.
Step 5 (Optional) Click to view event occurrence time, name, operation and reason.
6.4.3 Sub Device
When you add the first sub device, the default IP is the device IP address that logs in on the web.
From
SETTING
>
Cluster Service
>
Sub Device
, you can add sub devices. For details, see "6.4.2 Main
Device".
When adding the first sub device, you need not enter the IP address, because the first sub device is
the current device by default.
After you added main device and sub device, you need to enable cluster function. See "6.4.5
Configuring Cluster Control" for more information.

Dahua JRC-27F Specifications

General

Brand	Dahua
Model	JRC-27F
Category	Network Hardware
Language	English