Dahua JRC-27F User Manual

User's Manual
176
Figure 5-87 Face detection
Step 2 Select a channel, and then select
AI by Reorder
or
AI by Camera
as
Type
.
When
AI by Camera
is selected, you can enable
Face Enhancement
to improve face
detection efficiency.
Step 3 Click to enable face detection.
Step 4 Click
Setting
next to
Rule
to draw areas to filter the target.
You can configure two target filters (maximum size and minimum size). The system
triggers an alarm when the size of detected target is between the maximum size and the
minimum size.
Step 5 Click
Setting
next to
Schedule
to configure the arming period.
The system triggers corresponding alarm actions only during the arming period.
●
On the time line, drag to set the period.
●
You can also click to set the period.
Step 6 Configure alarm linkage actions. For details, see Table 5-43.
Step 7 Click
Apply
.
5.9.3.3 AI Search (Face Detection)
You can search for the detected faces and play back related recordings.

Dahua JRC-27F Specifications

General

Brand	Dahua
Model	JRC-27F
Category	Network Hardware
Language	English