User's Manual
283
Figure 5-195 DDNS
Step 2 Enable DDNS and then configure the parameters.
After you enable DDNS function, the third-party server might collect your device
information.
Table 5-57 DDNS parameters
Parameter Description
Type Displays the type and address of DDNS service provider.
●
For
Dyndns DDNS
, the default address is members.dyndns.org.
●
For
NO-IP DDNS
, the default address is dynupdate.no-ip.com.
●
For
CN99 DDNS
, the default address is members.3322.org.
Server Address
Domain Name
Enter the domain name that you have registered on the website of DDNS
service provider.
Username Enter the username and password obtained from DDNS service provider.
You need to register the username, password and other information on
the website of DDNS service provider.
Password
Interval Enter the interval at which you want to update the DDNS.
Step 3 Click
Apply
.
Enter the domain name in the browser on your computer, and then press the Enter key. If
the web interface of the Device is displayed, the configuration is successful. If not, the
configuration failed.
5.11.11 UPnP
You can map the relationship between the LAN and the WAN to access the Device on the LAN
through the IP address on the WAN.
5.11.11.1 Configuring Router
Procedure
Step 1 Log in to the router to set the WAN port to enable the IP address to connect into the WAN.
To Next Page
Loading...
Need help?
General
