User's Manual
325
Parameter Description
Private Protocol
Authentication Mode
●
Security Mode (Recommended): Uses Digest access
authentication when connecting to NVR.
●
Compatible Mode: Select this mode when the client does not
support Digest access authentication.
LLDP
Enable the LLDP service.
The Link Layer Discovery Protocol (LLDP) allows two different
devices to collect hardware and protocol information about
neighboring devices, which is useful in troubleshooting the
network.
Step 3 Click
Apply
.
5.14.2.2 802.1x
The Device needs to pass 802.1x certification to enter the LAN.
Procedure
Step 1 Select
Main Menu
>
SECURITY
>
System Service
>
802.1x
.
Figure 5-242 802.1x
Step 2 Select the Ethernet card you want to certify.
Step 3 Select
Enable
and configure parameters.
To Next Page
Loading...
Need help?
General
