User's Manual
236
Table 5-41 Crowd distribution parameters
Parameter Description
Crowd Density
(Global)
Click and then configure the density threshold.
Crowd Density
Alarm Tracking After an alarm occurs, the system tracks the target automatically.
Step 4 Click
Setting
next to
Schedule
to configure the arming period.
The system triggers corresponding alarm actions only during the arming period.
●
On the time line, drag to set the period.
●
You can also click to set the period.
Step 5 Configure alarm linkage actions. For details, see Table 5-43.
Step 6 Click
Apply
.
5.9.10.3 Report Query
You can search for and export video metadata statistics.
●
The statistics might be overwritten when the storage space runs out. Back up in time.
●
When you restore the Device to factory settings, all the data except data in the external storage
device will be cleared. You can clear the data in the external storage device through formatting
or other methods.
Procedure
Step 1 Select
Main Menu
>
AI
>
Report Query
>
Crowd Density
.
Step 2 Select the channel, report type, start time and end time, and then click
Search
.
Related Operations
●
Switch chart type.
Click
Bart Chart
or
Line Chart
to switch the chart type.
●
Export.
Select the file type, and then click
Export
to export the report in picture or csv format.
5.9.11 People Counting
The system can calculate the number of entry or exit people in the detection zone. An alarm is
triggered when the number has exceeded the threshold.
Make sure that the connected camera supports people counting.
5.9.11.1 Enabling Smart Plan
To use AI by camera, you need to enable the smart plan first. For details, see "5.9.2 Smart Plan".
To Next Page
Loading...
Need help?
General
