User's Manual
179
Figure 5-91 Face and body detection
Step 2 Select a channel, and then click to enable the function.
Step 3 Enable
Face & Body Image Enhancement
to improve detection efficiency.
Step 4 Configure target filters.
You can configure two target filters (maximum size and minimum size). The system
triggers an alarm when the size of detected target is between the maximum size and the
minimum size.
Step 5 Click
Setting
next to
Schedule
to configure the arming period.
The system triggers corresponding alarm actions only during the arming period.
●
On the time line, drag to set the period.
●
You can also click to set the period.
Step 6 Configure alarm linkage actions. For details, see Table 5-43.
Step 7 Click
Apply
.
5.9.4.3 AI Search (Face & Body Detection)
To search for face detection results, see "5.9.3.3 AI Search (Face Detection)". To search for body
detection results, see "5.9.8.3.1 Human Detection".
5.9.5 Face Recognition
The system compares the detected faces with the faces in the database to judge whether the
detected face belongs to the database. When the similarity reaches the defined threshold, an alarm
is triggered.
To Next Page
Loading...
Need help?
General
