User's Manual
195
Table 5-28 Tripwire parameters
Parameter Description
Name Customize the rule name.
Direction
Set the tripwire direction, including A
→
B, B
→
A and A
↔
B.
Target Filter
Click and then select effective target. With
Human
and
Motor
Vehicle
selected by default, the system automatically identifies the
person and motor vehicle appeared within the monitoring range.
4) Click
OK
.
Step 6 Configure alarm schedule and linkage.
Figure 5-109 Schedule and alarm linkage
1) Click .
2) Click
Setting
next to
Schedule
to configure the alarm period.
The system performs linkage actions only for alarms during the arming period.
●
On the time line, drag to set the period.
●
You can also click to set the period.
3) Configure alarm linkage. For details, see Table 5-43.
4) Click
Apply
.
Step 7 Select the
Enable
checkbox and then click
Apply
.
5.9.6.2.2 Intrusion
When the detection target passes the edge of the monitoring area, and enters, leaves or traverses
the monitoring area, the system performs an alarm linkage action.
Step 1 Select
Main Menu
>
AI
>
Parameters
>
IVS
.
To Next Page
Loading...
Need help?
General
