User's Manual
64
3.2 Checking Unpacked NVR
When you receive the NVR, check against the following checklist. If any of the items are missing or
damaged, contact the local retailer or after-sales service immediately.
Table 3-1 Checklist
Sequence Item Description
1
Overall
packaging
Appearance No obvious damage.
Package Not distorted or broken.
Accessories Nothing missing.
2 The Device
Appearance No obvious damage.
Model
The model description is consistent with the
contract.
Label
Not torn up.
Keep the label well. You need to provide the
serial number on the label when calling the
after-sales service.
3.3 HDD Installation
For the first time installation, make sure whether the HDD has been installed or not. We recommend
to use HDD of enterprise level or surveillance level. It is not recommended to use PC HDD.
●
Shut off the power before you replace the HDD.
●
Use the dedicated SATA HDD for monitoring recommended by the HDD manufacturer.
●
You can see the Appendix for HDD space information and recommended HDD brand.
3.3.1 NVR41-4KS2/NVR41-P-4KS2/NVR41-8P-4KS2/NVR41-
4KS2/L/NVR41-P-4KS2/L/NVR41-8P-4KS2/L/NVR21-4KS2/NVR21-P-
4KS2/NVR21-8P-4KS2/NVR21-W-4KS2/NVR21-I/NVR21-I2/NVR21-P-
I/NVR21-P-I2/NVR21-8P-I/NVR21-8P-I2/NVR21-S3/NVR21-P-
S3/NVR21-8P-S3
Connect cable and then secure the HDD on the NVR if it is not convenient to connect the HDD data
cable and power cable at first.
Procedure
Step 1 Loosen the screws of the bottom of the chassis.
To Next Page
Loading...
Need help?
General
