CP80 and CP80 Plus Service Manual 5-11
Working With Scripts
The scripting area allows you to create, load, and run scripts for adjusting
printers. A configuration script is a group of settings that are saved to a text file.
 Make sure the configuration script does not contain a Printer ID listing or a
Ribbon Type listing. If these parameters are present in the script file, use a
text editor to delete them.
The script display window shows the contents of the current script, whether
loaded from a file using Load script or created by modifying printer values.
To perform a single step and run the selected line of the script, click on Run step.
The line will be run and the next line highlighted.
To test the entire script, click on Run script.
To delete the highlighted line of a script, click on Delete value. (This option may
not be available for loaded scripts.)
After making printer value changes, click Save to a configuration script to
record the changes in a configuration script. The script can then be loaded into
another printer for batch processing a series of printers.
Click on Clear list if you want to clear the scripting window.
To Next Page
Loading...
Need help?
General
