5-18 Adjustments
Setting Printer Options
The Printer Options window controls various aspects and features of the printer.
Option Description
Enable duplex module
Enable or disable the duplex module for printers so
equipped.
Enable speaker audio Enable or disable the speaker output of the printer.
Enable mag stripe
Enable or disable the magnetic stripe capabilities of the
printer.
Enable smart card Enables or disables the smart card option in the printer.
View current printer options
Click on this button to refresh the options currently saved in
the printer.
Apply
Click this button to store the change in the printer's non-
permanent (RAM) memory. The changes will be discarded
when the printer is reset unless you click on Save.
Save
This saves the changes to the printer's EPROM memory. You
will be prompted for a password. Enter 42360.
Status display area This area displays the status of the current operation.
Prioritize messages
During the diagnostic session, the highest priority message
of each type is displayed.
Display all messages
During the diagnostic session, all messages are displayed.
This option reverts back to Prioritize messages when
Diagnostics is closed.
 Make sure the magnetic stripe and/or smart card options are enabled before
returning the printer to production.
To Next Page
Loading...
Need help?
General
