Dell E28S Series User Manual

Figure 26 Removing the memory module
a. memory module
b. memory module socket
c. memory module socket ejector (2)
After you finish
1. Install the memory module.
Note:
If you are removing the memory module permanently, install a memory module blank.
2. Install the cooling shroud.
3. Follow the procedure listed in the After working inside your system section.
Installing memory modules
Before you begin
Note:
The memory modules are hot to touch for some time after the system has been powered
down. Allow the memory modules to cool before handling them. Handle the memory modules
by the card edges and avoid touching the components or metallic contacts on the memory
module.
CAUTION Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Remove the cooling shroud.
Procedure
1. Locate the appropriate memory module socket.
Installing and removing system components
Dell PowerEdge R430 Owner's Manual 103

Dell E28S Series Specifications

General

Brand	Dell
Model	E28S Series
Category	Server
Language	English