EasyManuals Logo

Dell E28S Series User Manual

Dell E28S Series
220 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #84 background imageLoading...
Page #84 background image
Safety instructions
Note: Whenever you need to lift the system, get others to assist you. To avoid injury, do not
attempt to lift the system by yourself.
WARNING Opening or removing the system cover while the system is powered on may expose
you to a risk of electric shock.
CAUTION Do not operate the system without the cover for a duration exceeding five minutes.
CAUTION Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
Note: Dell recommends that you always use a static mat and static strap while working on
components inside the system.
Note: To ensure proper operation and cooling, all bays in the system and system fans must be
populated always with either a component or with a blank.
Before working inside your system
Before you begin
Follow the safety guidelines listed in the Safety instructions section.
Procedure
1. Turn off the system, including any attached peripherals.
2. Disconnect the system from the electrical outlet and disconnect the peripherals.
3. If installed, remove the front bezel.
4. If applicable, remove the system from the rack.
For more information, see the
Rack Installation
placemat at Dell.com/poweredgemanuals.
5. Remove the system cover.
After working inside your system
Before you begin
Follow the safety guidelines listed in the Safety instructions section.
Procedure
1. Install the system cover.
2. If applicable, install the system into the rack.
For more information, see the
Rack Installation
placemat at Dell.com/poweredgemanuals.
3. If removed, install the optional front bezel.
4. Reconnect the peripherals and connect the system to the electrical outlet.
5. Turn on the system, including any attached peripherals.
Installing and removing system components
84 Dell PowerEdge R430 Owner's Manual

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell E28S Series and is the answer not in the manual?

Dell E28S Series Specifications

General IconGeneral
BrandDell
ModelE28S Series
CategoryServer
LanguageEnglish

Related product manuals