Figure 28 Removing a 2.5-inch hard drive blank
a. hard drive blank
b. release button
After you finish
If removed, install the front bezel.
Installing a 2.5-inch hard drive blank
Before you begin
1. Follow the safety guidelines listed in the Safety instructions section.
2. If installed, remove the front bezel.
Procedure
1. Insert the hard drive blank into the hard drive slot until the release button clicks into place.
Figure 29
Installing a 2.5-inch hard drive blank
a. hard drive blank
After you finish
If removed, install the front bezel.
Installing and removing system components
106 Dell PowerEdge R430 Owner's Manual