Device Settings
Enables you to configure device settings.
System BIOS
You can use the System BIOS screen to edit specific functions such as boot order, system
password, setup password, set the RAID mode, and enable or disable USB ports.
Viewing System BIOS
To view the System BIOS screen, perform the following steps:
Procedure
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
Note: If your operating system begins to load before you press F2, wait for the system
to finish booting, and then restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
System BIOS Settings details
About this task
The System BIOS Settings screen details are explained as follows:
Option
Description
System Information
Specifies information about the system such as the system model name, BIOS version, and
Service Tag.
Memory Settings
Specifies information and options related to the installed memory.
Processor Settings
Specifies information and options related to the processor such as speed and cache size.
SATA Settings
Specifies options to enable or disable the integrated SATA controller and ports.
Boot Settings
Specifies options to specify the boot mode (BIOS or UEFI). Enables you to modify UEFI and
BIOS boot settings.
Network Settings
Specifies options to change the network settings.
Integrated Devices
Specifies options to manage integrated device controllers and ports and specify related
features and options.
Pre-operating system management applications
Dell PowerEdge R430 Owner's Manual 57
To Next Page
Loading...
Need help?
General