Dell E28S Series User Manual

Figure 24 Installing the cooling shroud (continued)
d. guide on the cooling shroud
e. guide pin
After you finish
1. Follow the procedure listed in the After working inside your system section.
System memory
Your system supports DDR4 registered DIMMs (RDIMMs).
Note: MT/s indicates DIMM speed in MegaTransfers per second.
Memory bus operating frequency can be 2400 MT/s, 2133 MT/s, or 1866 MT/s depending on the
following factors:
l
System profile selected (for example, Performance Optimized, Custom, or Dense
Configuration Optimized)
l
Maximum supported DIMM frequency of the processors
The system contains 12 memory sockets split into four sets — two sets of 4 sockets and two sets
of 2 sockets each. Each 4-socket set is organized into two channels and each 2–socket set is
organized into one channel. In each channel of the 4-socket set, the release levers of the first
socket are marked white and the second socket black. In the 2-socket set, each release lever is
marked white.
Note:
DIMMs in sockets A1 to A8 are assigned to processor 1 and DIMMs in sockets B1 to B4
are assigned to processor 2.
Installing and removing system components
94 Dell PowerEdge R430 Owner's Manual

Dell E28S Series Specifications

General

Brand	Dell
Model	E28S Series
Category	Server
Language	English