Dell E28S Series User Manual

SD vFlash card (optional)
An SD vFlash card is a Secure Digital (SD) card that plugs into the SD vFlash card slot in the
iDRAC port card. It provides persistent on-demand local storage and a custom deployment
environment that enables automation of server configuration, scripts, and imaging. It emulates
USB device(s). For more information, see the Integrated Dell Remote Access Controller User's
Guide at Dell.com/idracmanuals.
Removing the optional SD vFlash card
Before you begin
1. Follow the safety guidelines listed in the Safety instructions section.
2. Locate the SD vFlash card slot at the back of the chassis.
Procedure
1. To remove the SD vFlash card, push the SD vFlash card inward to release it, and pull the SD
vFlash card from the SD vFlash card slot.
Figure 56 Removing the optional SD vFlash card
a. SD vFlash card
b. SD vFlash card slot
Installing an optional SD vFlash card
Before you begin
1. Follow the safety guidelines listed in the Safety instructions section.
2. Locate the SD vFlash card slot at the back of the chassis.
Procedure
1. Install a the SD vFlash card by inserting the contact-pin end of the SD vFlash card into the
SD vFlash card slot on the iDRAC port card module.
Note:
The slot is keyed to ensure correct insertion of the SD vFlash card.
2. Press the SD vFlash card inward to lock it into the SD vFlash card slot.
Installing and removing system components
136 Dell PowerEdge R430 Owner's Manual

Dell E28S Series Specifications

General

Brand	Dell
Model	E28S Series
Category	Server
Language	English