Dell E28S Series User Manual

After you finish
1. Install the system cover.
Installing the system cover
Before you begin
1. Follow the safety guidelines listed in the Safety instructions section.
2. Ensure that all internal cables are connected and placed out of the way and no tools or extra
parts are left inside the system.
Procedure
1. Align the slots on the system cover with the tabs on the chassis.
2. Push the system cover latch down to move the system cover into the closed position.
The system cover slides forward and the slots on the system cover engage with the tabs on
the chassis. The system cover latch locks into place when the system cover is completely
engaged with the tabs on the chassis.
3. Rotate the latch release lock clockwise to the locked position.
Figure 20 Installing the system cover
a. latch release lock
b. latch
c. system cover
After you finish
1. If removed, install the front bezel.
2. Reconnect the peripherals and connect the system to the electrical outlet.
3. Turn on the system, including any attached peripherals.
Installing and removing system components
88 Dell PowerEdge R430 Owner's Manual

Dell E28S Series Specifications

General

Brand	Dell
Model	E28S Series
Category	Server
Language	English