Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
122
Figure 20. Network > Interfaces Page
Configuring Network Interfaces
The Network > Interfaces page allows the administrator to view and configure the IP address, subnet mask,
speed, and management settings of the X0, X1, X2, X3, and where available, the X4 and X5 interfaces on the
SMA/SRA appliance. For a port on your SMA/SRA appliance to communicate with a firewall or target device on
the same network, you need to assign an IP address and a subnet mask to the interface.
To configure these settings for an interface on the SMA/SRA appliance:
1 Navigate to the Network > Interfaces page and click the configure icon next to the interface you want
to configure.
2In the Edit Interfaces dialog box on the SMA/SRA appliance, type an unused static IP address in the IP
Address field. This IP address should reside within the local subnet to which your SMA/SRA appliance is
connected.
NOTE: If the Secure Mobile Access management interface IP address changes, the Secure Mobile Access
services are automatically restarted. This interrupts any existing user sessions, and users need to
reconnect to continue using the SMA/SRA appliance.
To Next Page
Loading...
Need help?
General
