Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
416
• If your policy applies to a range of IPv6 addresses, select the IPv6 Address Range option from
the Apply Policy To drop-down list and enter the IPv6 network address in the IPv6 Network
Address field and the IPv6 prefix in the IPv6 Prefix field.
6 Optionally enter a port range (80-443) or a single port number into the Port Range/Port Number field.
This field is available when you select IP Address, IP Address Range, IPv6 Address, or IPv6 Address
Range in the Apply Policy To drop-down list.
7 Select the service type in the Service drop-down list. If you are applying a policy to a network object,
the service type is defined in the network object.
8Select ALLOW or DENY from the Status drop-down list to either permit or deny SMA/SRA connections
for the specified service and host machine.
9Click Accept to update the configuration. After the configuration has been updated, the new policy is
displayed in the Edit Global Settings window. The global policies are displayed in the policy list in the
Edit Global Settings window in the order of priority, from the highest priority policy to the lowest
priority policy.
Edit a Policy for a File Share
To edit file share access policies:
1 Navigate to either the Users > Local Users or Users > Local Groups window.
2 Click the configure icon next to Global Policies. The Edit Global Settings window is displayed.
3 Select the Policies tab.
4Click Add Policy.
5Select Server Path from the Apply Policy To drop-down list.
6 Type a name for the policy in the Policy Name field.
7In the Resource field, select one of the following radio buttons for the type of resource:
• Share (Server path)
• Network (Domain list)
• Servers (Computer list)
8In the Server Path field, enter the server path in the format servername/share/path or
servername\share\path. The prefixes \\, //, \ and / are acceptable.
9Select PERMIT or DENY from the Status drop-down list.
10 Click Accept.
Edit Global Bookmarks
To edit global bookmarks:
1 Navigate to either the Users > Local Users or Users > Local Groups page.
2 Click the configure icon next to Global Policies. The Edit Global Policies window is displayed.
3Click Add Bookmark. An Add Bookmark window is displayed.
4 To edit a bookmark, enter a descriptive name in the Bookmark Name field.
NOTE: Share and path provide more granular control over a policy. Both are optional.
NOTE: When global bookmarks are defined, all users see the defined bookmarks from the Secure
Mobile Access user portal. Individual users are not able to delete or modify global bookmarks.
To Next Page
Loading...
Need help?
General
