Dell SMA 200 User Manual

Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
448
Netgear Wireless Router MR814 SSL
configuration
This guide assumes that your NetGear Wireless Router is configured with an IP of 192.168.100.1 and your
SMA/SRA appliance is configured with an IP of 192.168.100.2.
1 Navigate to Advanced > Port Management in the left index of your Netgear management interface.
2Click Add Custom Service in the middle of the page.
3 Enter a service name in the Service Name field (ex. SMA)
4Enter 443 in the Starting Port field.
5Enter 443 in the Ending Port field.
6 Enter the WAN IP address of the SMA/SRA appliance (ex.192.168.100.2) in the Local Server Address
field.
7Click Accept.
Your Netgear wireless router is now ready for operations with the SMA/SRA appliance.
Check Point AIR 55
To p i c s:
• Setting up an SMA/SRA Appliance with Check Point AIR 55 on page 449
• Static Route on page 450
• ARP on page 450

Dell SMA 200 Specifications

General

Brand	Dell
Model	SMA 200
Category	Switch
Language	English